eDoubler

The eDoubler module is used to add an extra applied and measured voltage range to select instruments which have a higher compliance voltage. It is a module that is directly connected between the instrument and the cell cable.

It is compatible with the Vertex.One, dModule.1A/20V, CompactStat2.h20250, and XP20 instruments. In these cases the applied/measured voltage range is increased to match the compliance voltage, i.e. ?20V.

• Maximum applied voltage: ?20V
• Applied/measured resolution: Twice (2x) the primary potentiostat resolution
• Applied/measured accuracy: Twice (2x) the primary potentiostat error
• Input impedance: 100GOhm
• Electrometer input current: <150pA
• Electrometer bandwidth: Half (0.5x) the primary potentiostat bandwidth
• EIS frequency range: 10uHz to 50kHz (accurate without recalibration)